Nothing should stop you or slow you down from getting on the water. Retrospec’s new iSUP Intelligent Electric Pump takes the hassle out of inflating your inflatable stand up paddleboard so you can save your energy for the fun part. Retrospec’s iSUP Intelligent Electric Pump features a 2-stage, 12 volt DC electric pump with a preset pressure LCD screen. Set your pressure value, lock your pump into place, flip it on, and wait! Your pump will inflate your board to the perfect pressure for painless paddling and stop inflating right at the desired PSI.
Retrospec’s iSUP Intelligent Electric Pump comes with a flex-hose with fittings and a helpful owner’s manual.
Power Type: 12V DC
DC plug-in cord length: 118 in / 3M
Flex-Hose length: 39 in / 1M
Pressure Range: 0 to 20 PSI
Pressure Max: 20 PSI
Standby Mode: 2 minutes no use
Powering On/Off: Press/hold power button 3 seconds
Runtime – max.: 20 min.
Min Cooling Time: 30 min
Motor: 2-stage: auto-switching low-pressure/high-volume / high-pressure/low-volume
Gaskets: 3 sizes: 1 factory installed (thinnest); 2 additional.