Blackburn Luminate 360 Light Set


Products can only be shipped to U.S. addresses.


Blackburn understands being able to see in the dark is important, but they also believe that so is being visible to cars. A recent study by the national highway traffic safety administration (nhtsa) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). With the luminate 360 set, being seen from all angles while cycling has never been easier. The grid side beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. While the grid side beacon can be used as a stand alone light, Blackburn believes it works best as part of their luminate 360 light set. The dayblazer 400 front light and the 65 rear, are spec’d with blitz mode to keep you bright enough to be seen, day or night.

Weight: 4.16 oz
Ansi Standard: Meets ANSI FL-1 Standard. This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. Although bicycle lights are not required to follow this or any standard, Blackburn believes in offering full transparency in how the output, run time, water resistance and other performance claims are measured.
Brightness: Up to 400 lumens front, Up to 65 lumens rear, Up to 85 lumens side
Run Time:
Blitz mode (front): 1 hour at 400 lumens
Low mode (front): 1.5 hours at 200 lumens
Pulse mode (front): 6 hours at 200 lumens
Strobe mode (front): 10 hours at 200 lumens
Solid mode (rear): 1 hour at 50 lumens
High flash/Strobe mode (rear): 3 hours at 65 lumens
Low flash/Strobe mode (rear): 6 hours at 35 lumens
High solid mode (side): 1.5 hours at 85 lumens
Low solid mode (side): 3 hours at 50 lumens
High flash mode (side): 3 hours at 85 lumens
Low strobe mode (side): 6 hours at 50 lumens
Water Resistance: IP-65 submersible – Ingress protection rating or “IP Rating,” is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 Standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction.
Mounting Options: Swivel mount – A rotating mount allows the light to be adjusted to center on the road! This versatile silicone mount fits handlebars from 22–35mm and can be used to strap to some helmets. — Versatile mounting system – Round seat posts, aero posts, seat stays or loops on bags/clothes (with the built-in wire clip) are all fair game for mounting the DAYBLAZER rear light thanks to its unique and reconfigurable bracket interface
Recharge Time: 3-hour recharge front, 2-hour recharge rear, 2 hours side

360 Visibility
Amber LEDs
1 Light for Each Side
Meets Ansi FL-1 Standard
LED Fuel Gauge/Charge Indicator
Manufacturer’s Limited Lifetime Warranty

Additional information

Weight 1.0000 lbs
Dimensions 0.0000 × 0.0000 × 0.0000 cm